Card Base- 8 1/2 x 5 1/2
Designer Series Paper - 5 1/4 x 4 (2)
Pattern -2 1/2 x 3 1/4
Whisper White - 5 1/4 x 4 (inside greeting)
First of all create the pattern you will use several times from the 2 1/2 x 3 1/4 scrap. Cut diagonally and mark the 3 1/4" side so you will know which one it is.
Score the 8 1/2 x 5 1/2 card base at 4 1/4
Fold the card in half and using the pattern, place the 3 1/4" edge along the fold line on the card base and score along the bottom edge of the pattern
Flip it over and do the same on the other side. Be sure the pattern is placed face down so you don't see the writing. With the 3 1/4" side along the fold line score along the bottom edge of the pattern
Fold this score line back and forth holding it together
You have created the card base!
Now for decoration. Take the Whisper White and put the pattern with the 3 1/4 edge in the top right corner and put pencil mark on each edge. Place the Whisper White in the Paper Trimmer and cut from one mark to the other. Do the same with the DSP you have chosen for the front of the card.
For the inside top you will have a piece of DSP on this one you will place the 3 1/4 edge along the bottom right corner. Make the marks along the top edge of the pattern piece and cut along that line. The pieces you cut off will need 1/16" trimmed from the longest edge and they will be used for the two wedge pieces in the inside.
You can continue to decorate. If you have any questions or need any supplies please be sure to contact me. If you need supplies to complete this project I have listed them below. Click on the pictures and you will be shopping with me.